News

Marble and Granite Monuments Manufacturing

The process of marble and granite monuments manufacturing begins with the selection of a slab of stone for the memorial. Once the slab has been selected, the stone is polished by automated machines that use silicon carbide bricks and large metal discs. The process creates a mirror-like finish. Once the slab is polished, it is then run through a guillotine to split it into the size of the monument. Trained craftsmen then finish the rough edges. The finished monument may be polished on the edges or left unfinished.

Originally, gravestones were slab tablets, a few feet high and set a few feet into the ground. These tombstones typically included religious verse or epitaphs underneath information about the deceased. With the advent of the civil war, stone work continued to change and became increasingly intricate. In the 1800s, marble and granite monuments manufacturing became more widespread and the use of stone for construction increased. This evolution in monuments manufacturing led to the development of many different styles and types. фотокерамика

Granite is a hard stone with a tight crystalline structure. When cut, a granite memorial will withstand centuries of weather conditions and environmental changes. It will not crack, chip or break if a tree branch falls on it or a tornado tips it over. Moreover, granite is very inexpensive, and many churchyards only allow monuments made of marble and granite. Its beauty and durability have made it a popular choice for monuments.

Marble and granite monuments manufacturing requires a great deal of work and a skilled workforce. Once the monument is finished, it is sent for engraving. There are several different methods for engraving monuments, and the most common ones are sandblasting, diamond etching and shadow shaping. Depending on the design, the stone may be engraved using any of these methods. After the carving process, the stone is thoroughly cleaned and packaged. It is then delivered to its final destination.

Although marble and granite monuments manufacturing is still a highly skilled process, motorized tools have made the process more efficient. Granite is the hardest stone and has the highest density. When it comes to sturdiness and durability, there is no better material for memorials than granite. Granite is a popular choice for grave markers, because it is very resistant to weather and is widely available. And, due to its beauty, granite is widely accepted as one of the most beautiful materials for grave markers.

During the 1700s, only small amounts of marble were imported from Italy. Transportation time was slow, and the cost was prohibitive for the general public. This situation was remedied by railroads. In 1848, the white river junction was connected to a quarry in Bethal, Vermont. The Montpelier and White River Railroad connected Barre with the Bethal quarry in Vermont. Today, Vermont is an active source of high-quality granite.

Leave a Reply

Please log in using one of these methods to post your comment:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s